|
|
BARS
and SEMI-FINISHED PRODUCTS |
Materials: |
Special Steels
Tempering steels
Case hardening steels
Nitriding steels
Steels for tempered springs
Wear-proof steels (sliding)
Fatigue resistant steels
Tools steels
High speed steels
Stainless steels
Stainless steels for medical equipment and for surgical implants
Valve steels
Non magnetic steels
High-temperature resistant steels
Turbine steels
Duplex and Superduplex steels
Corrosion-resistant steels
Knife and cutter steels
Offshore grades
Heating conductor alloys
Controlled-expansion and glass sealing alloys
Nickel and Nickel alloys
Ni-Cu and Cu-Ni alloys |
Product shapes and sizes: |
Round Bars:
|
4,5-22 mm drawn
11,5-125 mm rolled
24-800 mm forged |
Square Bars |
20-150 mm rolled
160-600 mm forged |
Flat bars |
20x5 to 150x40 mm rolled
14x10x600 – 1000 mm forged |
Billets |
50-150 mm |
Slabs |
max. 320x25 – 200
mm |
Continuous Casting |
80 – 350 mm round |
|
Conditions of supplied materials: |
Bars grinded, bright, straightened,
peeled (until 300 mm), turned (> 300 mm), shot blasted,
pickled, grounded, black.
Untreated, cold saw able, normalized, soft annealed, spheroidised
annealed, annealed + stress relieved, hardened and tempered,
quenched, further heat treatment conditions on demand. |
|
WIRES |
Materials: |
Special Steels
Tempering steels
Case hardening steels
Nitriding steels
Steels for tempered springs
Wear-proof steels (sliding)
Fatigue resistant steels
Tools steels
High speed steels
Stainless steels
Stainless steels for medical equipment and for surgical implants
Valve steels
Non magnetic steels
High-temperature resistant steels
Turbine steels
Duplex and Superduplex steels
Corrosion-resistant steels
Offshore grades
Heating conductor alloys
Controlled-expansion and glass sealing alloys
Nickel and Nickel alloys
Ni-Cu and Cu-Ni alloys
|
Size: |
0,08 - 13 mm. |
Conditions of supplied materials: |
Cold drawn, bright, skin passed,
spring temper, naked surface or with special coatings. Hard
and annealed wires, on coils, coils on uncoilers, spools or
drums. |
|
WIRE RODS |
Materials: |
Special Steels
Tempering steels
Case hardening steels
Nitriding steels
Steels for tempered springs
Wear-proof steels (sliding)
Fatigue resistant steels
Tools steels
High speed steels
Stainless steels
Stainless steels for medical equipment and for surgical implants
Valve steels
Non magnetic steels
High-temperature resistant steels
Turbine steels
Duplex and Superduplex steels
Corrosion-resistant steels
Offshore grades
Heating conductor alloys
Controlled-expansion and glass sealing alloys
Nickel and Nickel alloys
Ni-Cu and Cu-Ni alloys |
Size: |
5,5 - 25 mm. |
Conditions of supplied materials: |
Rolled, pickled, shot blasted
on coils, max. 1000 Kg weight. |
|
FOILS |
Materials: |
High Purity Metals
(e.g. Nickel, Titanium, Tantalum, Iron)
Precious metals
Copper and Copper Alloys
Metallic Alloys (as Fe-Ni and Ni-Cr)
High grade Alloys |
Size: |
Thickness 0,001 – 0,1 mm
Width max. 110 mm |
Conditions of supplied materials: |
Cold rolled, as-rolled condition
or heat-treated, on coils or sheets. |
|
RIBBONS |
Materials: |
Special Steels, Heating conductor alloys
Controlled-expansion and glass sealing alloys
Nickel and Nickel alloys
Ni-Cu and Cu-Ni alloys. |
Size: |
Width 0,2 - 8 mm / Thickness 0,05
- 1,5 mm |
Conditions of supplied materials: |
Ribbon from rolled wire, cold
drawn, bright, skin passed, naked surface or with special
coatings
Hard or annealed ribbons on spools. |
|
TUBES |
Materials: |
Stainless steel: 304,
304L, 305, 316, 316L, 316LVM, 316Ti, 321, 347, 904L
Nickel and nickel alloys: Ni 200, Ni 201, Monel®, Inconel®
600, 601, 625, X750, NiCr 90/10, NiCr 80/20
Cobalt alloys: Phynox®, Elgiloy®, L605®, MP35N®
Iron Nickel alloys: Mumetal®, Controlled expansion alloys
(Invar®, N48, N52, FeNiCo)
Ttitanium, Tantalum, Niobium
Nickel-Titanium (Nitinol)
Implantable material
Precious metals: Gold, Platinum, Iridium, Silver
Copper alloys: OFHC copper, Beryllium Copper, Cupro-Nickel
Special alloys on request |
Product shapes and sizes: |
Ext. Diameter 0,15 – 15
mm
Thickness 0,012 – 3 mm
Int. Diameter min. 50 µm.
Dimensional tolerance up to +/- 5 µm
Roughness up to
0,10 µm.
Round, square, and special section |
Conditions of supplied materials: |
Seamless and welded tubes, drawn,
as drawn condition or heat-treated, on coils or in fixed lengths |
|
|